Heltec Lora32 IOT Node V2 für Arduino

CHF29.00 inkl. MWST

WiFi LoRa 32 ist ein klassisches IoT-Entwicklungsboard, das von Heltec Automation (TM) entwickelt und hergestellt wurde. Es ist ein hochintegriertes Produkt, das auf ESP32 + SX127x basiert. Es verfügt über Wi-Fi, BLE, LoRa-Funktionen sowie ein Li-Po-Batteriemanagementsystem. 0,96 “OLED sind ebenfalls enthalten. Es ist die beste Wahl für Smart Cities, Smart Farms, Smart Home und IoT-Hersteller.


Artikelnummer: F3_HTORANODEV2 Kategorien: , ,



WiFi LoRa 32 is a part of the “Heltec LoRa“ series, with the following features:

 CE Certificate;
2Microprocessor: ESP32 (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1276/SX1278;
3Micro USB interface with complete voltage regulator, ESD protection, short circuit protection, RF shielding and other protection measures;
4Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching);
5Integrated WiFi, LoRa, Bluetooth three network connections, on-board Wi-Fi, Bluetooth dedicated 2.4GHz metal 3D antenna, reserved IPEX (U.FL) interface for LoRa use;
6On-board 0.96-inch 128*64 dot matrix OLED display, which can be used to display debugging information, battery power and other information;
7Integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information printing;
8Support the Arduino development environment;
9(Exclusive) Supports the Arduino version of the ESP32 + LoRaWAN protocol routine provided by Heltec. This is a standard LoRaWAN protocol that can communicate with any gateway/base station running the LoRaWAN protocol (requires serial number activation, only the development of the company) The board is available)
10With good RF circuit design and basic low-power design (sleep current ≤800uA), it is convenient for IoT application vendors to quickly verify solutions and deploy applications;

Technical Parameters

MCUESP32( 240MHz Tensilica LX6 dual-core + 1 ULP, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth)
LoRa chipSX1276
LoRa bandsEU_433, CN_470_510, EU_863_870, US_902_928 four bands optional
LoRa maximum output power18dB ± 2dB
Hardware resourcesUART x 3; SPI x 2; I2C x 2; I2S x 1
12 – bits ADC; 8 – bits DAC
29 general GPIO
Display0.96 inch 128*64 OLED display
interfaceMicro USB x 1; LoRa antenna interface(IPEX) x 1
Size50.2 x 25.5 x 9.74 mm
USB to UART BridgeCP2102
Battery Type3.7V Lithium(SH1.25 x 2)
 Battery detection circuit √
External device power control(Vext) √
 Low power design Deep Sleep 800uA

Eletrical characteristics

Electrical characteristicsconditionMinimumTypicalMaximum
Power SupplyUSB powered(≥500mA)4.7V5V6V
Lithium powered(≥250mA)3.3V3.7V4.2V
Power consumption(mA)WIFI scan115mA
LoRa 10dB emission50mA
LoRa 12dB emission60mA
LoRa 15dB emission110mA
LoRa 20dB emission130mA
Output3.3V pin output500mA
5V pin output (USB powered only)Equal to input current
External device power control (Vext 3.3V)350mA

Heltec Lora32 Pinout Schema

Heltec Lora32 Pinout Schema

Zusätzliche Information



, , , , , , , ,



Spannungseingang [V]

, , ,


, , ,


Setup und Installation: https://heltec.org/wifi_kit_install/

Heltec ESP(ESP32 & ESP8266) framework (the basic of Heltec ESP series products Arduino running environment): https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series

Heltec ESP32 library (must work with Heltec ESP framework): https://github.com/HelTecAutomation/Heltec_ESP32

Heltec ESP32 LoRaWAN library (a standard LoRaWAN protocol library provide by Heltec Automation, need a license to active: http://www.heltec.cn/search/): https://github.com/HelTecAutomation/ESP32_LoRaWAN

Adafruit CircuitPython TinyLora library (Alan Peaty ported and shared this library): https://github.com/fantasticdonkey/uLoRa


Es gibt noch keine Bewertungen.

Schreibe die erste Bewertung für „Heltec Lora32 IOT Node V2 für Arduino“

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.

Heltec Lora32 IOT Node V2 für Arduino
Heltec Lora32 IOT Node V2 für Arduino
Heltec Lora32 IOT Node V2 für Arduino
Heltec Lora32 IOT Node V2 für Arduino