The Hawk is a robust plug-and-play IoT data logger and sensor hub for cellular LTE-M/NB-IoT networks designed to support an extensive range of sensor integrations.
- Available in several power and housing variations to best fit your application
- Flexible I/O Card Architecture caters for plug-in cards that define the 9 inputs/outputs, offering limitless options for interfacing to sensors such as SDI-12, I²C, 1-Wire, iButton, 4-20mA, RS-485, RS-232*, Analog Inputs, Digital Inputs, Pulse Counting, Digital Outputs, Switched Power, and more (*coming soon)
- Ultra-low power design for maximum battery life
- Multiple external power options including solar power – can also supply power to external sensors
- Powerful task management to schedule or run tasks based on sensor thresholds and events
- Over-the-air (OTA) Remote Device Configuration, Management and Firmware Updates
- Securely send data to any end platform via TCP Direct or HTTPS Webhook
- Hawk PCB, I/O Cards, and Housing now sold separately – the flexibility to build what you need
The Flexibility to Build What You Need
Choose Your Sensors
The versatile Hawk architecture caters for plug-and-play I/O Cards that define the 9 inputs/outputs, offering limitless options for interfacing to sensors.
Choose Your Power
Power the Hawk with a large internal rechargeable LiPo battery (this version), external power including solar, or 2 x D Cell LTC batteries (please contact us for this version).
Choose Your Housing
Select from our ultra-rugged Hawk housing options or build your own. This version comes with a IP68 IK08 housing. Contact us for different housing.
Choose Your Endpoint
Securely send data to any end platform via TCP Direct or HTTPS Webhook (over OEM Server).
Integrate Any Sensor with Plug-and-Play I/O Cards
The versatile Hawk architecture caters for plug-and-play I/O Cards that define the 9 inputs/outputs, offering limitless options for interfacing to sensors. We have a range of deployment-ready cards available and are always expanding (cards not included. Must be purchased seperately).
- Agtech 1 – 1 x Digital Input, 1 x Switched Ground, I²C, SDI-12, 3.3V Switched Power Out, 5V or 12V Switched Sensor Power, 1-Wire® or iButton®, 4-20mA
- Agtech 2 – Coming Soon – 4 x Analogue Inputs (0-30V Range), 1 x Switched Ground, SDI-12, 3.3V Switched Power Out, 5V or 12V Switched Sensor Power, 1-Wire®
- Bluetooth Gateway – Coming Soon
- RS-1 – 1 x Analogue Input (0-30V Range), 1 Digital Input, 1 x Switched Ground, RS485 (Modbus), 3.3V Switched Power Out, 5V or 12V Switched Sensor Power, 1-Wire®, 1 x 4-20mA input
- Serial (RS-232 and TTL) – Coming Soon
- Digin (Multiple Digital Inputs and 2 x Analogs) – Coming Soon
Choose your Power
Large Rechargeable LiPo – Powered by 3500mAh rechargeable LiPo battery to support full-season deployments.
Rechargeable LiPo with External Power – Connect the Hawk to an external power source such as a solar panel or grid power to facilitate long-term deployments.
D Cell Battery Pack – Powered by 2 x D Cell LTC batteries for a completely self-powered solution. Depending on your sensor setup, this could give many years of life before a DIY battery change is required. (optional available; please contact us)
Choose your Housing
Hawk LiPo – Ultra-rugged and waterproof housing (IP68 and IK08) with GORE® vent. Designed to accommodate the PCB, I/O Card, and 3500mAh rechargeable LiPo battery. Includes 2 cable glands to allow for waterproof cable entry to the housing. (this version)
Hawk D Cell – Ultra-rugged and waterproof housing (IP68 and IK08) with GORE® vent. Designed to accommodate the PCB, I/O Card, and 2 x D Cell LTC Batteries. Includes 2 cable glands to allow for waterproof cable entry to the housing. (contact us for this version)
Board and I/O Card Only – No external housing, ideal for users and businesses who are building their own custom housing. (contact us for this version)
Recensioni
Ancora non ci sono recensioni.