The RAK7268V2 WisGate Edge Lite 2 is the cheapest route to a LoRaWAN of your own — provided a network cable reaches the installation point. It receives on eight channels, brings a full network server along and passes the data on over MQTT, without you having to rent a platform or take out a subscription. It is set up in a browser. Compared with its bigger sister exactly one thing is missing: mobile. Anyone who does not need it does not pay for it here — at identical radio performance.
- 8 channelsSemtech SX1302
- PoEpower over the network cable
- network serverbuilt in, no subscription
- 300 g166 × 127 × 36 mm
What sets the Edge Lite 2 apart
- The network server is already in it: register sensors directly on the gateway, collect the data over MQTT — without an external server, without a cloud account, without running costs. For one site that is often all it takes.
- It does not charge for what you do not use: this version has no LTE module. Where a network connection exists, mobile adds nothing — the radio performance on the LoRa side is identical to the more expensive variant.
- One cable is enough: PoE to 802.3af powers the device over the same cable that carries the data. So it is not the power socket that decides the location but the radio view — and that is the more important factor.
- Setup without a console: for initial configuration the gateway opens its own WiFi. Connect, open the interface, configure. No command line, no OpenWRT knowledge needed, even though the system builds on it.
- Replaceable antenna: the RP-SMA connector sits on the outside. On an indoor device that matters more than it sounds — a remote antenna still wins range back from an unfavourable location.
- Logged and buffered: micro SD card for logs, plus firewall, logging and OpenVPN on board. If someone later asks why a reading is missing, there is a trail.
- Remote management included: configuration, firmware and monitoring run centrally through WisDM — from the second device in the field it is no longer a luxury.
- Classes A and C: the gateway serves both device classes, so also actuators that must be reachable at any time.
Where it is used
- First network of your own in a building: in normal construction one gateway covers several floors — for indoor climate, meters or door contacts that is usually enough for the whole property.
- Businesses and production: monitoring machines and plant without pulling a cable for every sensor.
- Development and prototypes: quickly set up, fully configurable — ideal for testing a concept before larger sums are committed.
- Schools and training: a full LoRaWAN you can touch, in which all layers stay visible.
- Second gateway for redundancy: an inexpensive addition alongside an existing device, so that one failure does not cost the whole network.
- Larger rollouts: because installation and commissioning need no specialist knowledge, the device scales from one building to many.
That settles the selection. What follows is the depth for planning and operation.
What the built-in network server can do — and where its limit lies
In a LoRaWAN the gateway at first does only one thing: it receives radio packets and passes them on. It is the network server that decrypts them and manages the device keys. Usually it runs elsewhere — at The Things Stack, ChirpStack or a provider. This gateway brings it along, which shortens the start considerably: create sensors, collect data over MQTT, done.
The limit shows with the second gateway. If two devices receive the same sensor packet — normal and desirable — a shared server would have to discard the duplicates. With one server per gateway that does not work cleanly. So as soon as you cover more than one site or plan overlap, you move to a central network server and run the gateways purely as receivers. The built-in server is the ideal start, not the end goal — and switching is a setting, not a rebuild.
Location and antenna
The antenna is screwed on externally and therefore replaceable — that matters more than most datasheet figures. A gateway in the basement with the standard antenna achieves less than one on the top floor. A higher-gain antenna brings range across a plane but less above and below; for a multi-storey building the supplied antenna is usually the better choice, for flat sites one with more gain.
Practical advice: place the device as high and as clear as possible, keep distance from metal surfaces and concrete floors, and run a test at the least favourable point before mounting a hundred sensors. On transmission rights: a legal duty-cycle limit applies in the 868 MHz band. For the sensors that hardly matters; for the gateway it does — it answers joins and confirmations. Anyone registering many devices at once or using confirmed transmissions will reach this limit.
Technical data
The general product data — protection rating, dimensions, weight, memory, certifications and origin — is in the detail table further down this page.
| LoRaWAN | |
|---|---|
| Channels | 8, Semtech SX1302 concentrator |
| LoRaWAN version | 1.0.3, device classes A and C |
| Network server | built in, with MQTT bridge and TLS; operation against an external server possible |
| Antenna connector | RP-SMA, antenna replaceable |
| Connectivity | |
| Ethernet | RJ45 with PoE per 802.3af |
| WiFi | 2.4 GHz (802.11 b/g/n), also as an access point for setup |
| Mobile | not present — for that, the RAK7268CV2 version |
| Further connections | USB 2.0, USB Type-C, micro SD card |
| Operation | |
| Power supply | 12 V DC or PoE (802.3af) |
| Operating temperature | −10 … +55 °C |
| Processor | MT7628, 128 MB RAM |
| Software | WisGateOS 2 on an OpenWRT basis, firewall, logging, OpenVPN, remote management via WisDM |
Which version suits you?
The WisGate family differs mainly in how the gateway reaches the internet and how it is powered. We stock the models listed here ourselves.
| Model | Mobile | What it is made for |
|---|---|---|
| RAK7268V2 Edge Lite 2 (this page) | no | When a network connection is available. Same LoRaWAN performance, cheaper. |
| RAK7268CV2 Edge Lite 2+ | yes, internal antenna | The all-rounder: Ethernet, WiFi and LTE on board. |
| RAK7268 with external LTE antennas | yes, external antennas | When mobile reception is weak at the installation point. |
| WisGate Edge Prime RAK7240CV2 | yes | The outdoor model in an IP65 housing — when the gateway itself has to go outside. |
Help with the build
The datasheet and instructions are under the Documents tab at the top of this page. Building your first LoRaWAN network and unsure about antenna choice, location, or whether the built-in network server is enough for your plans? Talk to us — these questions are settled in a ten-minute conversation, whereas a wrong decision can cost weeks. And if it turns into a project — sizing, pre-configuration or commissioning — we will gladly put together a quote.


Reviews
There are no reviews yet.