Dragino D20S-NB NB-IoT soil temperature sensor with buriable 2 m probe (868 MHz)

SKU:3JRT
MPN:D20S-NB-GE
Brand:Dragino
Categories:
Sensoren:
Availability CH:
not in stock0
From external stock:
Lead timein approx. 20 days
The lead time applies from 10 units. For smaller quantities please ask us. (?)

CHF68.42 excl. VAT

plus shipping

LoRaWAN temperature sensor with a buriable probe on 2 m of TPE cable: DS18B20 from −55 to +125 °C, ±0.5 °C typical, intended by the manufacturer for soil and road surfaces. IP66 enclosure, recording when the network drops, 8500 mAh cell for up to five years. For soil temperature, frost warning and sports turf.

! To operate this device you need a LoRaWAN network. You can build one yourself with a LoRaWAN gateway, use the LORIOT or TTN network, or rely on the Switzerland-wide Swisscom LoRaWAN. All of these networks are available from us.
 Add to comparison

The Dragino D20S-NB is the D20 with the probe that is allowed into the ground: the same DS18B20, but in a TPE-sheathed cable that Dragino explicitly intends for burial in soil and in road surfaces. Two metres of cable take the probe to the depth where the question is decided — root zone, frost line, carriageway surface — while the IP66 enclosure stays up on the post and transmits. Measuring range −55 to +125 °C, ±0.5 °C typical, 8500 mAh cell for up to five years. This version transmits without a gateway over NB-IoT straight onto the cellular network — in return it needs a SIM card and a server that accepts the data.

  • −55 … 125 °Cprobe range
  • ±0.5 °Ctypical, max. ±2.0 °C
  • 2 m TPEburiable probe cable
  • IP66enclosure, probe IP65
  • 8500 mAhLi-SOCl₂ cell

What defines the D20S-NB

  • The probe is built to be buried: Dragino explicitly describes the S version as “designed for use in soil or road” and names TPE for the cable. That is the difference from the D20 — there the cable material is left open; here it is named, and TPE is the sheath that neither hardens nor turns brittle in the ground.
  • A measuring range that covers most applications: −55 to +125 °C is not a marketing figure but the DS18B20’s range. For soil temperature that is far more than needed — and precisely why the same article stays usable when the next measuring point is on a heating return.
  • Two metres of cable take the probe down: the device stays up where it has coverage and remains reachable; the probe lies at twenty centimetres, at half a metre, or under the surface. On a compact sensor both would be in the same place — unthinkable for a soil measurement.
  • A digital bus, not analogue technology: the DS18B20 delivers a digital value. There is no characteristic curve to store, no line loss to compensate and no calibration at commissioning — unlike PT100s or thermocouples.
  • An alarm flag in every message: a dedicated bit shows whether the value has left a set threshold. Thresholds are set by downlink, and so is the minimum time between two alarm messages — a sensor sitting at the frost line therefore does not flood the network.
  • Recording when the network drops: if coverage fails, the device writes timestamped readings to its own memory and sends them on once the network is back. At measuring points out in a field, where coverage fluctuates, that is no side issue.
  • Device status travels along: cell voltage, device model, IMEI and serial number sit in the same message as the readings. For a fleet that means the inventory can be kept from the running data stream without querying the device — and the cell voltage doubles as the early warning before a battery change.
  • A large cell, soberly reckoned: 8500 mAh of Li-SOCl₂ is three times that of a common room sensor. The manufacturer quotes up to five years — for a buried measuring point nobody likes digging up again, that is the decisive figure.
  • Configuration without a network server: reporting interval and thresholds are set on the device or sent back through your own server. There is no LoRaWAN network server managing downlinks here — that responsibility sits with your platform.
  • No gateway, no network server: the device transmits straight onto the cellular network and sends its data to your endpoint. No device profile, no join, no key management — but a SIM that wants managing.
  • The same electronics, four probe variants: anyone measuring above ground takes the D20 with its stainless probe; two measuring points on one device, the D22; three, the D23. Decoder and integration stay the same.

Where the D20S-NB is used

  • Soil temperature in arable farming: germination temperature, timing of cultivation, spring warming. The probe sits at sowing depth, the device at the field edge.
  • Frost warning in orchards and vineyards: soil temperature leads air temperature and is therefore an earlier indication than the air sensor alone.
  • Road and path maintenance: surface temperature for black-ice warning and gritting plans — Dragino names the road surface explicitly as a place for this probe.
  • Sports turf and golf greens: root zone temperature drives fertilisation, irrigation and playability.
  • Greenhouse and raised bed: substrate temperature rather than air temperature — the quantity that actually governs root growth.
  • Compost and silage: the probe sits in the heap, the device on a post. Self-heating caught early is the difference between turning the pile and a fire.
  • Ground collectors and infiltration systems: temperature at the laying horizon, over years and without excavation.
  • Large rollouts: one article, one decoder, one spare — and through the D20S-LS, D20S-NB and D20S-CB variants the same measuring technology with a different form of power or radio.
Without a SIM and without a server nothing works. This version (order suffix GE) comes without a SIM card. You need an NB-IoT-capable SIM — not every data card is — and an endpoint for MQTT, TCP or UDP. Cellular costs money continuously. A data charge falls due per device per year; with several devices in one place LoRaWAN with your own gateway is almost always cheaper. It measures temperature, not moisture. Soil moisture and conductivity need a different probe — the SE01 from the same brand. Anyone wanting to determine irrigation demand will not get there on temperature alone. ±0.5 °C is the typical tolerance, not the guaranteed one. Dragino explicitly states up to ±2.0 °C as the maximum across the whole range. For trends, frost warning and running an operation that is enough; for an acceptance measurement it is not. The device itself does not belong in the ground. What gets buried is the probe, not the enclosure: IP66 is about jets of water, not burial, and a buried antenna does not transmit. The cable is two metres long and fixed. It passes through the gland and cannot be extended; those two metres limit laying depth and distance to the mast together. And the cell is not rechargeable. At the end of its life it is replaced; anyone wanting to avoid that takes the solar version D20S-LS.

That covers the purchase decision. What follows is the depth needed for installation, integration and operation.

What “buriable” demands in practice

The manufacturer’s statement is brief: TPE sheath, two metres, for soil and road surfaces. That is half the answer. TPE really is the right sheath for this purpose — it stays flexible in the cold, absorbs almost no water and withstands UV and hydrolysis considerably better than soft PVC. What the statement does not contain is everything beyond the sheath.

Consequence for installation: three things decide whether a buried measuring point lasts for years. First, strain relief at the enclosure — the cable should not carry the load; a loop and a fixing to the mast should. Second, protection against the next spade: most failures come not from ageing but from the next excavation, which is why the position belongs marked and the cable, where possible, run inside a conduit. Third, a depth that matches the question — sowing depth is five to ten centimetres, the frost line sits around eighty depending on the region, and both with the same probe is not possible.

Assessment from field practice, not a manufacturer statement: with soil temperature the sensor’s own error is rarely the problem; the spread between two measuring points in the same field regularly exceeds the DS18B20’s half a degree. Anyone wanting to judge an area gains more from two simple measuring points in different places than from one more accurate one. And the laying depth belongs on record — a soil temperature without a stated depth is not a usable figure.

Payload and integration

Without LoRaWAN the whole apparatus of ports, device profiles and decoders falls away: there is no FPort, no network server and no payload function for anyone to maintain. The device opens a connection to the cellular network and delivers the same values — cell voltage, measured quantities, alarm flag, device identity — straight to your endpoint.

Consequence for the integration: what was the decoder in the network server under LoRaWAN is here the receiver on your side. That is less infrastructure but the same work — the raw format has to be interpreted once. The exact field order is in the manufacturer’s cellular manual, linked under “Documents”; it differs from the LoRaWAN version and belongs held against a real message once at commissioning.

One point regularly overlooked on cellular devices: the device identity comes from the IMEI and serial number, not from a DevEUI. Anyone running a fleet of LoRaWAN and cellular devices together needs a key field that can take both.

No gateway — what that costs and what it saves

NB-IoT uses the cellular network that is there anyway. So there is no gateway infrastructure to build, no coverage to plan and no network server to run. In return every device needs a SIM card and a server that accepts the data — the costs do not disappear, they move from the initial investment into running expenses.

The arithmetic that comes first: a single sensor somewhere remote is a clear case for cellular — a gateway for one device never pays. Thirty sensors on one site are an equally clear case for LoRaWAN. The boundary lies, depending on tariffs, somewhere between five and ten devices per site, and it shifts with the question of whether anyone is there to look after a gateway.

Assessment from field practice, not a manufacturer statement: what is regularly underestimated is not the radio technology but the SIM. Many standard data cards are not enabled for NB-IoT at all, and that only shows when the device fails to get onto the network at the site. On top comes administration: a hundred LoRaWAN devices hang on one network server, a hundred NB-IoT devices on a hundred SIM contracts with terms and invoices. That is not a technical but an organisational argument — and on larger fleets it decides more often than range does.

Connecting to your own server

The device speaks MQTT, MQTT over TLS, TCP and UDP. MQTT with TLS is the right choice for most applications: widespread, economical and encrypted. UDP is more economical still and therefore kinder to the battery, but offers no delivery guarantee — usable where individual lost messages are tolerable.

Server, port, credentials and topic are set on the device. There is no network server decoding the payload; the device sends straight to your endpoint. Decoder maintenance falls away, and responsibility for reachability and certificates rests with you.

Data at a glance

Sensing element1 × Dallas DS18B20, IP65, 2 m cable with TPE sheath, for burial in soil or road surface
Temperature−55 … +125 °C · ±0.5 °C typical, up to ±2.0 °C maximum · resolution 0.1 °C
Operating temperature−40 … 85 °C (device)
RadioNB-IoT via Quectel BC660K-GL · B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B28/B66/B70/B85 in H-FDD
ProtocolsMQTT · MQTT over TLS · TCP · UDP
SIMGE version: without SIM · nano-SIM slot · 1T version: 1NCE SIM, 500 MB over 10 years
Payloadraw format straight to your own endpoint · no FPort, no network-server decoder · field order in the manufacturer’s cellular manual
Configurationon the device or through your own server’s return channel · Bluetooth 5.1 on site · firmware update over the air
Power8500 mAh Li-SOCl₂, not rechargeable · quiescent current 5 µA at 3.3 V · manufacturer: up to 5 years
EnclosureIP66 · 200 × 120 × 55 mm · 372 g
VersionsD20S-LB LoRaWAN battery · D20S-LS LoRaWAN solar · D20S-NB NB-IoT · D20S-NS NB-IoT solar · D20S-CB LTE-M and NB-IoT · D20S-CS LTE-M and NB-IoT solar

What the manufacturer does not state: a maximum laying depth, any statement on rodent resistance and a dimensioned drawing of the probe are all missing; the diameter and length of the sensing head appear neither on the product page nor in the manual. Whether the probe may sit permanently in groundwater is also unanswered — IP65 is specified for jets of water, not for permanent submersion. We are asking the manufacturer and will add it here.

+ Show more

Dokumente

Reviews

There are no reviews yet.

Be the first to review “Dragino D20S-NB NB-IoT soil temperature sensor with buriable 2 m probe (868 MHz)”

Details

General
Brand
Dragino
Manufacturer part number
D20S-NB-GE
Colour
black
Connectivity
Connectivity
NB-IoT
NarrowBand Internet of Things, eine Low-Power-Wide-Area-Technologie, die speziell für das IoT entwickelt wurde, um eine größere Abdeckung mit geringerem Stromverbrauch zu ermöglichen.
External antenna
yes
Power supply
Power supply
Batterie
Batteries included
Ja
Number of batteries
1
Battery type
Li-SOCL₂
Die Li-SOCl₂-Batterie ist ein hochleistungsfähiger Energiespeicher, der Lithium (Li) und Thionylchlorid (SOCl₂) verwendet. Sie zeichnet sich durch eine hohe Energiedichte, lange Lagerfähigkeit und eine breite Betriebstemperaturbereich aus, was sie ideal für IoT-Geräte macht, die eine langanhaltende, zuverlässige Energiequelle benötigen. Im Kontext von IoT definiert sie die Fähigkeit, Geräte über längere Zeiträume autark betreiben zu können, selbst in anspruchsvollen Umgebungsbedingungen.
Mechanics/design
Product weight (g)
372
Width (mm)
120
Length (mm)
200
Height (mm)
55
IP code / rating
IP66
Staubdicht. Schutz gegen starkes Strahlwasser und bei Überflutung. Ein IoT-Sicherheitskamera im Freien könnte diesen Schutz haben.
Temperature range
-40 °C bis 85 °C
Cards
Nano-SIM (4FF)
Commercial information
Country of origin
China
Other properties
Sensors
soil temperature
,
temperature
Battery life
3-5 Jahre
Place of use
indoor and outdoor